Perfectone Net Ware GW-200 - Manual (Page 4)

GW-200 User Manual
4
gateway has finished rebooting, it will be in static IP mode. Then you pick up
the phone again, press 1234 192*168*1*100, then press the “IP/SET” key on
GW-200 and hang up the phone. Gateway will reboot again. Now the phone’s
IP address is 192.168.1.100, if you want to check it, please refer to the item 1.
Features
Hardware
Main chip—pa1688 50MHz
Data Memory—2MB SDRAM
Program Memory—1 MB Flash memory
Ethernet Jack—10/100M jacks
AC/DC adapter—Input AC 230V or 120V Output 9V DC, 500mA
Software
DHCP support for LAN or Cable modem
PPPoE support for ADSL or Cable modem
Set phone by HTTP web browser (IE6.0) or Telnet
Upgrade by FTP
Support major G.7XX and gsm610 audio codec
VAD(Voice Active Detect)
CNG (Comfort Noise Generation)
Dynamic voice jitter buffer
G.168/165 compliant 16ms echo cancellation
Tone generation and Local DTMF re-generation according with ITU-T
E.164 dial plan and customized dial rules
Voice prompt
Hotline
Standard and Protocol
GW-200 supports following standard and protocol:
IEEE 802.3 /802.3 u 10 Base T / 100Base TX
Major G.7XX and gsm610 audio codec