Perfectone Net Ware GW-200 - Manual (Page 11)

GW-200 User Manual
11
register ttl : The gateway will send a keep-alive registration message
to gatekeeper every “ register ttl ” seconds. The value range is
10-65535. Default is 60.
jitter size : Set buffer size of RTP package. The value range is 0-32.
service type : This option is used to accommodate the miscellaneous
requirements of the system providers. When gateway is connected to
these systems, please select the corresponding service type.
Common: no special requirements
Mediaring: use Mediaring prepaid card
Etalk: use etalk prepaid card. When this is selected, please select
“ dialnum ” from the “ Use dialplan ” list box and put “ 00 ” into “ dial
number ”.
Auvtech: use Auvtech’s system. When connected with
Auvtech’s system, please select “ auvtech ” from the “ nat traversal
” list box, select “ account ” from the “ local type ” list box.
Subcentrex: Use Subcentrex’s system
Ringtec: Use Ringtec’s system. When this is selected, please
select “ dialnum ” from the “ Use dialplan ” list box and put Ringtec
account into “ dial number ”.
Smartcon: Use Smartcon’s system
Dda: Use Dda’s system
Vida: Use Vida’s system
Citron: Use Citron’s system
Asiasoft: Use Asiasoft’s system
Huawei: Use Huawei’s system
Asiainfo: Use Asiainfo’s system
Lucent: Use Lucent’s system