beautypg.com

Dvd setup menu options, Audio setup page – Philips HTS3105 User Manual

Page 35

background image

35

English

Audio Setup Page

(underlined options are the factory default settings)

Speakers Volume

Access the speaker’s level setup menu. Use W X keys to adjust

the volume level for each connected speaker between -6dB to
+6dB.

Speakers Delay

Access the speaker’s distance setup menu. Use W X keys to set

the delay times for the centre and rear speakers based on the
listening position and distance.

Note: 1 ms increase/decrease of delay time is equivalent to 30 cm
change in distance. Use the longer delay time settings when the rear
speakers are closer to the listener than the front speakers.

Night Mode

This mode optimises playback of sound at low volume. High

volume outputs will be softened and low volume outputs will be
enhanced to an audible level. This feature is only applicable for
DVD video discs with Dolby Digital mode.

{ On }

– Turns on night mode.

{ Off }

– Turns off night mode feature. Selects this

to enjoy the surround sound with its full
dynamic range.

CD Upsampling

This feature enables you to convert your music CD to a higher

sampling rate using sophisticated digital signal processing for
better sound quality. If you have activated the CD upsampling
feature, the system will automatically switch to stereo mode.

{ Off }

– Turns off CD-upsampling.

{ 88.2 kHz (X2) } – Select this to convert the sampling rate of

the CDs twice as high as the original rate.

Note: If you press the SURR button on the remote control to select
multi-channel mode, it will turn off the CD upsampling feature.

DVD Setup Menu Options

(continued)

This manual is related to the following products: