Philips PET712/12 - Manual (Page 17)

To connect power from inside a car:
Connect the car adaptor cable to the
DC IN jack of the main unit and to the
car cigarette lighter socket.
To connect power from household
power sources: Connect the AC adaptor
cable to the DC IN jack of the main unit
and to the power outlet.
•
•
Car Cigarette Lighter Socket Car Cigarette Lighter Socket
Install remote control batteries
Caution
Risk of explosion! Keep batteries away from heat, sunshine
or fire. Never discard batteries in fire.
Risk of decreased battery life! Never mix different brands
or types of batteries.
Risk of product damage! When the remote control is not
used for long periods, remove the batteries.
Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
•
•
•
•
For first-time use:
1
Remove the protective tab to activate the
remote control batteries.
To replace the remote control batteries:
1
Open the battery compartment.
2
Insert 1 CR2025 3V lithium battery batteries
with correct polarity (+/-) as indicated.
3
Close the battery compartment.