Polycom 2W - Manual (Page 33)

SoundStation2W™ Administrator Guide - 33
Caller ID*
You can turn Caller ID on or off. By default, Caller ID
is on.
*Caller ID is a subscription
service. Check with your local
telephone service provider to de-
termine if this service is available
in your area.
Phone System
1. Press the Menu button, choose
Admin Setup and press the Select
button, enter passcode (if required)
and press the
ENTER soft key.
Choose Phone System using the
Scrolling buttons, and press the
Select button.
2. Choose Caller ID using the Scroll-
ing buttons, and press the Select
button. Press the
ON or OFF soft
key or cycle through the options
using the Scrolling buttons.
3. Press the SAVE soft key or the
Select button to save your entry.
You may press the Exit button to
cancel your entry.
Audible Alerts
You can turn the Low Battery and Signal Strength
audible alerts on or off. By default, the Low Battery
audible alert will be on, but the Signal Strength audible
alert will be off.
1. Press the Menu button, choose
Admin Setup and press the
Select button, enter passcode (if
required) and press the
ENTER
soft key. Choose Phone System
using the Scrolling buttons, and
press the Select button.
2. Choose Audible Alerts using
the Scrolling buttons, and press
the Select button. Choose
either Low Battery or Signal
Strength using the Scrolling
buttons, and press the Select
button. Press the
ON or OFF soft
key or cycle through the options
using the Scrolling buttons.
3. Press the SAVE soft key or the
Select button to save your entry.
You may press the Exit button
to cancel your entry.