Philips SVA104 - Manual (Page 34)

VCR/TV POWER EJECT
1 2 3
4 5 6
7 8 9
0 +100
CHANNEL
INDEX SLOW
SPEED
QUICK-
FIND TIME
EXIT COUNTER DISPLAY MENU
RESET MEMORY
REWIND / PLAY F.FWD
RECORD PAUSE/STILL / STOP
SEARCH
34 Repeat Play
Follow the steps below to program the VCR to play a tape over
and over. Make sure:
● The VCR is on and is in VCR position. The VCR/TV light will
appear on the front panel. If it does not, press the VCR/TV but-
ton once.
● There is a tape in the VCR.
1
Press the MENU button repeatedly until the VCR SET
UP menu appears.
2
Press the PLAY button or the STOP button repeatedly to
select AUTO REPEAT.
3
Press the F.FWD button so that [ON] appears next to
AUTO REPEAT. Tape playback will begin immediately. AUTO
REPEAT B will appear on-screen briefly.
(If you are fast forwarding or rewinding the tape, you must first
press the COUNTER RESET/EXIT button to exit, then press the
PLAY button to begin tape playback.)
The VCR will play the tape to the end, rewind it, then play it
again. (TV programming will appear on-screen while the tape is
rewinding.)
1
3
2
VCR SET UP
→ SATELLITE LINK
AUTO REPEAT
RENTAL
AUTO RETURN
VCR SET UP
SATELLITE LINK
→ AUTO REPEAT
RENTAL
AUTO RETURN
• To cancel AUTO REPEAT, follow
steps 1 - 2 above. At step 3, press
the F.FWD button so that [ON] no
longer appears beside AUTO
REPEAT. Press the COUNTER
RESET/EXIT button to exit.
• The COUNTER MEMORY button
does not function if AUTO REPEAT
is set to [ON].
• The real-time counter memory is
cancelled if AUTO REPEAT is set to
[ON].
Helpful Hints