Poulan Pro PP4300 - Manual (Page 10)

10
KNOW YOUR GENERATOR
with all operating features and safety rules.
The grounding terminal is used to assist in properly
GROUNDING TERMINAL
grounding the generator to help protect against electrical
shock. Consult with a local electrician for grounding
requirements in your area.
Your generator has the following single phase, 60 Hz
RECEPTACLES
outlets: four 120 Volt AC, 20 Amp, and one 120 Volt/240
Volt AC, 30 Amp. The receptacles can be used for
operating appropriate appliances, electrical lighting,
tools, and motor loads.
The circuit breaker is provided to protect the generator
AC CIRCUIT BREAKER
against electrical overload and can be used to turn the
generator抯 power on or off.
The engine switch is used in combination with the recoil
ENGINE SWITCH
starter grip to start the generator. It is also used to turn
the generator off.
Remove the oil cap to check and add oil to the generator
OIL FILL CAP/DIPSTICK
when necessary.
FEATURES
RECOIL STARTER GRIP
The recoil starter grip is used (along with the engine
switch) to start the generator抯 engine.
The flow of fuel through the generator is controlled by
FUEL VALVE
the position of the fuel valve.
The air filter helps to limit the amount of dirt and dust
AIR FILTER
drawn into the unit during operation.
Use the choke lever for starting a cold engine.
When changing the engine oil, the oil drainage bolt is
CHOKE LEVER
OIL DRAINAGE BOLT
loosened to allow old engine oil to be drained.
Consult the fuel level gauge to determine the amount of
FUEL LEVEL GAUGE
fuel remaining in the generator.
The fuel tank has a capacity of 6.6 gallons.
FUEL TANK
See 1
Fig.