Panasonic KX-TG2224F - Manual (Page 14)

Programmable Functions
14
Dialing Mode
If you have touch tone service, set to “Tone”. If rotary or pulse service is used, set
dialing mode to “Pulse”. The factory preset is “Tone”.
Voice Enhancer Technology
Voice Enhancer Technology ( ) helps clarify and improve sound reception
creating a natural-sounding voice that is easy to hear and understand.
This is accomplished by enhancing the frequency that is narrowed through the
telephone line and comes pre-set to OFF at the factory.
Under normal conditions, cordless phones are limited to a narrowed frequency
bandwidth (300Hz to 3.5KHz). Panasonic’s new Voice Enhancer Technology
cordless phones are able to simulate a band signal above and below the normal
bandwidth limitations. As a result, a clearer, crisp sound much closer to the actual
voice is achieved.
• “ ” is displayed when the Voice Enhancer Technology is set to ON.
1 Press [MENU] .
2 Scroll to “ Initial setting ” by pressing [ ]
or [ ] , then press Select .
3 Scroll to “ Set tel line ” by pressing [ ] or
[ ] , then press Select .
4 Press Select at “ Set dial mode ”.
5 Select “ Pulse ” or “ Tone ” by pressing [ ] or
[ ] .
6 Press Save , then press [OFF] .
1 Press [MENU] .
2 Scroll to “ Voice enhancer ” by pressing [ ]
or [ ] , then press Select .
3 Select “On” or “Off” by pressing [ ] or [ ].
4 Press Save, then press [OFF].
Handset
>
>
Initial setting
Exit Select
>
>
>
>
Set tel line
Back Select
>
>
Set dial mode
Back Select
>
>
>
>
Set dial mode
:Tone
Back Save
>
>
Handset
>
>
Voice enhancer
Exit Select
>
>
>
>
Voice enhancer
:Off
Back Save
>
>