Powermatic HPS67 - Manual (Page 24)

24
Trouble Probable Cause Remedy
Belt tension incorrect. Properly tension belt.
Motor overload due to incorrect feed
rate.
Reduce feed rate.
Reduction of speed
during cutting.
Dull blade(s). Resharpen or replace.
Power line overloaded. Correct overload condition.
Undersize wires in supply system. Increase supply wire size.
Low voltage.
Request voltage check from power
company and correct condition.
Motor fails to develop
full power.
Bad motor. Replace motor.
Optional Accessories
6080152 Saw Blade, 120mm/24T, 20mm Bore
6080153 Saw Blade, 12”/72T, 30mm Bore
HPS67-159 Dado Bushing 1”
Replacement Parts
Replacement parts are listed on the following pages. To order parts or reach our service department, call
1-800-274-6848 between 7:30 a.m. and 6:00 p.m. (CST), Monday through Friday. Having the Model
Number and Serial Number of your machine available when you call will allow us to serve you quickly and
accurately.