Pantech C300 - Manual (Page 60)

This function enables you to take a photo in various ways
using the built-in camera. The photo can be saved and sent
with a multimedia message.
Take a Photo
Taking photos when your phone is open
❶ Press the [Menu] Soft key, 6.Camera, and then select
1.Take a Photo to enter your phone’s photo capture
mode.
❷ To change the photo shooting mode, press the Right Soft
key ([ ]]). This toggles between the following options,
represented by icons on your phone’s display.
❸ Press the Scroll key ([ u/d]) to zoom in/out of the image
in the current preview when the image size is 128X128.
And press the Scroll key ([ l/r]) to control the seven
levels of brightness.
❹ The phone saves the image automatically when the user
presses the [ o] key. Press the [c] key to return to the
camera preview screen.
59
Camera
Tip You can also press the [Camera] Soft key ([ ]]) on the
idle screen to take photo. At this time, the image size depends on
the user setting.
Shooting Mode Icon Description
Single Capture General mode for a single photo.
Multi Capture
Takes multiple photos. The quantity
of photos is determined by the
[Multi-shot] option.
Frame Capture
Takes a photo with a built-in frame.
The image size is fixed as 128X128.
NOTE The default image size is 640X480 mode. You cannot set
Frame in 640X480 size.
NOTE In Multi Capture mode, the photo can be named
automatically only if one photo is set as Marked. Select [Mark] or
[Unmark] to check the image that you want to save.
Tip If you are taking photos while your phone is open, you
can use the following keys to adjust your phone’s camera directly.
Function Description Key
Brightness 7 levels (from 0 to 6) Scroll key [ l/r]
Zoom
Change the zoom levels
(only available in 128x128
size).
Scroll [ u/d]
06.04.06_C300_EN_REV00.indd 59 2006.4.6 11:28:38 AM