Pioneer PDP-505CMX Plasma Display Panel RS-232 - Manual (Page 11)

11
RS-232C Adjustment Mode
SSI ######### Displays the current sub screen input function.
¶ ¶
SSIS01 INPUT1(SUB) Switches the sub screen to INPUT1.
‡ ‡
SSIS02 INPUT2(SUB) Switches the sub screen to INPUT2.
‡ ‡
SSIS03 INPUT3(SUB) Switches the sub screen to INPUT3.
‡ ‡
SSIS04 INPUT4(SUB) Switches the sub screen to INPUT4.
‡ ‡
SSIS05 INPUT5(SUB) Switches the sub screen to INPUT5.
‡ ‡
STD STANDARD W/B Returns the integrator PICTURE and WHITE
‡
BALANCE to the factory settings.
SVL SUB VOLUME: ∗∗∗ Adjusts the sub volume.
‡ ‡
SZM ######## Displays the current screen size setting.
¶ ¶
SZMS00 Dot by Dot or PARTIAL Sets the screen size to Dot by Dot or PARTIAL.
‡ ‡
SZMS01 4 : 3 Sets the screen size to 4:3.
‡ ‡
SZMS02 FULL or FULL1080i Sets the screen size to FULL or FULL1080i.
‡ ‡
SZMS03 ZOOM Sets the screen size to ZOOM.
‡ ‡
SZMS04 CINEMA Sets the screen size to CINEMA.
‡ ‡
SZMS05 WIDE Sets the screen size to WIDE.
‡ ‡
SZMS08 FULL1035i Sets the screen size to FULL1035i.
‡ ‡
SZMS09 UNDERSCAN Sets the screen size to UNDERSCAN.
‡
[T]
TNT TINT: ∗∗∗ Adjusts the TINT.
‡ ‡
[U]
UP0 # Adds 10 to the adjustment value.
‡ ‡
UPn # Adds n to the adjustment value (n = 1 to 9).
‡ ‡
UPF # Sets the adjustment value to maximum.
‡ ‡
USC UNDERSCAN: ∗∗∗ Displays the current UNDERSCAN setting.
‡
USCS00 UNDERSCAN: OFF Turns the UNDERSCAN setting OFF.
‡
USCS01 UNDERSCAN: ON Turns the UNDERSCAN setting ON.
‡
[V]
VOL VOLUME: ∗∗∗ Adjusts the audio volume.
‡ ‡ ‡
VPS V. POSITION: ∗∗∗ Adjusts the V POSITION.
‡ ‡
VRO AUDIO OUT VARIABLE Selects variable audio output.
‡
VSI V. SIZE: ∗∗∗ Adjusts V. SIZE.
‡ ‡
Command name AJY (232C integrator) Display
RS-232C
Adjustment
Validity
Normal
Validity
Numerical
Direct
Validity
Remarks