6 the printer cover will not close – Polaroid P4000 User Manual
Page 27

Page 24
5 The printer does not respond when
printing a card or when clicking
“Resume” on the Printer Toolbox.
•
Make sure the printer is plugged in. See
for more information.
•
Make sure the printer is connected to the computer.
•
If the Status Light on the printer is blinking amber (yellow), press
the Ready button.
•
Power the printer off and on (disconnect the power cord from the
side of the printer and then connect it again) to see if
communication resumes.
•
See Info Central for more detailed communication
troubleshooting information.
6 The printer cover will not close.
•
Make sure no extra items are inside the printer.
•
Make sure the print ribbon cartridge is installed correctly. See
”Loading print ribbon” on page 7
.
•
If you installed or bumped the printhead cartridge, make sure it is
installed correctly. See Production in Info Central.
•
Push down firmly on the front edge of the cover to latch it.
What is the problem?
Try this: