Programming a recording with teletext – Philips 21PV708-715-908/39 User Manual
Page 21
Programming a recording with TELETEXT
With this function programming a recording will be
considerably easier. In TELETEXT you select the TV
programme you want to record. All the required information
for recording will be transferred and stored in a TIMER block.
You can find more information on TELETEXT in the chapter ’TV
SET FUNCTIONS’.
a
Select the TV channel you want to record from.
b
Press
TELETEXT e
to activate TELETEXT. Your TV-VIDEO
Combi will now show TELETEXT for the TV channel you
have selected.
c
With the number buttons
0-9
select the TELETEXT
programme guide page. This page can be stored as the
preferred page (see paragraph ’How to read TELETEXT’).
d
Press
TIMER s
. ’
PLEASE WAIT...
’ will briefly
appear at the bottom of the screen.
Next, a highlighted title line will appear.
D If ’
NO TIMER INFORMATION ON THIS
PAGE
’ appears, TELETEXT programming cannot be
used for the programme you have selected. In this
case, you should programme the recording as
described in the paragraph ’programming a
recording’.
e
A cursor (
h
) will appear at the first programme line. Use
the
B
and
A
buttons to move the cursor (
h
) to the TV
programme you want to record.
D If you want to cancel this function, press
TELETEXT e
.
f
Press
OK
. The timer menu will appear. The required
programming information has been stored in a TIMER
block. Please check the information.
TIMER PROGRAMMING
VPS
DATE PROG. START END
LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx
15:36 15:50 - * ONCE
Store:
press OK
g
For changing the timer information, select the entry field
with the
D
or
C
button. Change the information with
the
B
or
A
button or with the number buttons
0-9
.
D Under ’
REP.
’, use the
B
or
A
button to select
daily or weekly programming.
’
ONCE
’: Recording only once.
’
Mo-Fr
’: Recording from Monday to Friday.
’
Mo-Su
’: Recording from Monday to Sunday.
’
WEEKL
’: Recording every week on the same day.
D Under ’
VPS/PDC
’ switch ’VPS/PDC’ on or off with
the
B
or
A
button.
D Under ’
LP
’ select the recording speed ’SP’ or ’LP’
with the
B
or
A
button.
h
When all information is correct, press
OK
.
i
Confirm the message on the screen with
OK
.
A Timer recording can only start, if the set is not being
used for other video recorder functions (e.g. playback).
D The programming information has been stored in a
TIMER block.
j
Exit the menu with the
TIMER s
button.
k
Make sure that the cassette you have put in can be
recorded on.
Automatic recording from a satellite
receiver (SAT RECORDING)
You can use this function if you own a satellite receiver that
can control other machines via a scart cable and a
programming function.
a
Press
TIMER s
on the remote control.
b
Select the line ’
TIMER PROGRAMMING
’ with the
B
or
A
button and confirm with
C
.
TIMER PROGRAMMING
VPS
DATE PROG.
START END
LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
--
--
--:-- --:--- -
-----
Exit:
Start:
press TIMER
press
19