Polaroid PDM-0990DS - Manual (Page 57)

- 12 -
Remote Control
1. POWER button
Press to access to or exit the STANDBY mode.
2. TV button
Press to enter TV mode.
3. DVD button
Press to enter DVD mode.
4. AV1 button
Press to shift to external AV1 input mode.
5. AV2 button
Press to shift to external AV2 input mode.
6.
Press to select menu items or settings. Press buttons to adjust volume. Or
press to adjust value in the picture setup menu. Press buttons to select
channels forward and backward in TV mode. Or press to adjust the value of time
when setting time on the display panel.
7. ENT button
Press to confirm selections.
8. MENU button
Press to access the menu of current mode.
9. 16:9/4:3 button
Press to shift the aspect ratio between 16:9 and 4:3.
10. 0-9 number buttons
Select numbers by pressing these buttons.
One-digit number: press the number button and press the ENT button or wait 2
seconds to confirm.
Two-digit number: press the first number and input the second number in 2
seconds.
Three-digit number: press the first number, then input the second number in 2
seconds, and input the third number in the next 2 seconds.
11. CH DISP
In TV mode, display the current channel information.
12. CLOCK button
Press once to display the time on the display panel. In standby status, the time is
still displayed on the display panel. Press twice to set the time on the display
panel. Use the buttons to select the editing position of hour or minute, use
the buttons to adjust the value of the hour or minute upward and downward.
13. LAST button
Press to back the last channel that you watch in TV mode.
14. SET button
Press to enter and exit from the timer setup menu. In STANDBY mode, press this
button to setup the alarm clock.