Panasonic 1210 - Manual (Page 99)

Operating your IP Phone 1210
99
Using Automatic Post-selection
The called party is either busy on the IP Phone or away from their desk.
To page the called party, you need not redial the number of the called
party.
4. If your call remains unanswered for a
preset time period, during which you
hear a 15-second high-pitched tone
sounds followed by silence, press the
Goodbye key or replace the handset.
1. Press the RadPag soft key.
You hear a special dial tone.
2. Dial the Radio Paging Access FFC.
You hear the ringback tone.
The paged party can use any IP Phone
to enter a
Radio Paging Answer FFC,
and their own DN number.
3. If your call remains unanswered for a
preset time period, during which you
hear a 15-second high-pitched tone,
followed by silence, press the
Goodbye
key or replace the handset.
or
(Goodbye)
RadPag
or
(Goodbye)