Pioneer DEH-4000UB - Manual (Page 24)

Adjusting initial settings
1 Press OFF and hold until the unit turns
off.
2 Press the appropriate button for your
unit.
DEH-5000UB
Press
SRC and hold until FM STEP appears in
the display.
DEH-4000UB
Press
MULTI-CONTROL and hold until
CLOCK SET appears in the display.
3 Turn MULTI-CONTROL to select one of
the initial settings.
DEH-5000UB
FM STEP (FM tuning step)
—AUTO PI (auto PI
seek)
—AUX (auxiliary input)—SW CONTROL
(rear output and subwoofer controller)
—
EVER SCROLL (ever scroll)
—TITLE SETTING
(multi language)
—POWER SAVE (power sav-
ing)
—CUSTOM COLOR (illumination color ad-
justing)
DEH-4000UB
CLOCK SET (clock)
—OFF CLOCK (off clock)—
FM STEP (FM tuning step) —AUTO PI (auto PI
seek)
—AUX (auxiliary input)—SW CONTROL
(rear output and subwoofer controller)
—
EVER SCROLL (ever scroll)
—TITLE SETTING
(multi language)
# You can also perform the same operations by
pushing
MULTI-CONTROL up or down.
# To cancel initial settings, press BAND/ESC.
Setting the clock
This function is available only for DEH-4000UB.
Use these instructions to set the clock.
1 Use MULTI-CONTROL to select
CLOCK SET.
2 Press MULTI-CONTROL to display the
setting mode.
# Press BACK to return to the previous display.
3 Press MULTI-CONTROL to select the seg-
ment of the clock display you wish to set.
Each time you press
MULTI-CONTROL, one
segment of the clock display is selected.
Hour
—Minute
As you select segments of the clock display,
the selected segment blinks.
4 Turn MULTI-CONTROL to put a clock
right.
# You can also perform the same operations by
pushing
MULTI-CONTROL up or down.
Turning the off clock
display on or off
This function is available only for DEH-4000UB.
If the off clock display is turned on, the clock
appears on the display when the sources are
off.
1 Use MULTI-CONTROL to select
OFF CLOCK.
2 Press MULTI-CONTROL to turn the off
clock display on.
# To turn the off clock display off, press
MULTI-CONTROL again.
Setting the FM tuning step
The FM tuning step employed by seek tuning
can be switched between 100 kHz, the preset
step, and 50 kHz.
! If seek tuning is performed in 50 kHz steps,
stations may be tuned in imprecisely. Tune
in the stations with manual tuning or use
seek tuning again.
1 Use MULTI-CONTROL to select FM STEP.
2 Press MULTI-CONTROL to display the
setting mode.
Initial Settings
En
24
Section
04