Philips PR0930X4 - Manual (Page 5)

3 2 1
6 5 4
9 8 7
0
POWER
STATUS/EXIT
ALT. CH FM
SLEEP TV/AUX
MENU MUTE
VOL. VOL.
CH.
CH.
MENU Button
Press to access or remove the on-screen menu.
Press the CH(annel) ▲/▼ buttons to select an
item in the menu. Press the VOL(ume) B/{
buttons to adjust an item in the menu or to
advance to the next menu.
Number Buttons
Press to select channels.
• Cable Users
Enter channel numbers as a two-digit number for
the quickest results. For example, to select chan-
nel 6, press 0,6. (Pressing only Number button 6
will cause a brief delay. There also may be a brief
delay when you select channels 10, 11, and 12.)
For channels 100 and above, enter three-digit
numbers. For example, to select channel 117,
press 1, 1, 7.
• Antenna Users
Enter channel numbers as a two-digit number for
the quickest results. For example, to select chan-
nel 5, press 0,5. Pressing only the Number 5 but-
ton will cause a delay in selecting channel 5. Only
channels 2-69 are available.
MUTE Button
Press to disable the sound in TV mode and FM
mode. Press again to restore the sound.
CH(annel) ▲/▼ Buttons
Press to scan through available channels.
Press to select an item in the on-screen menu.
When in FM mode, press to select an FM radio
channel.
STATUS/EXIT Button
Press to see the current channel number on the
TV screen.
Press to remove the on-screen menu. You also
may remove the menu by pressing the
CH(annel) ▲/▼ buttons to select EXIT, then
pressing the VOL(ume) B/{ buttons. (You
may need to select EXIT repeatedly to com-
pletely remove all of the menus.)
POWER Button
Press to turn the TV on and off.
SLEEP Button
Press to set the TV to turn itself off automati-
cally. Details are on page 6.
ALT. CH (Alternate Channel) Button
Press to return to the previously viewed TV
channel.
VOL(ume) B/{ Buttons
Press to adjust the TV sound level in TV mode
and FM mode. Press to adjust an item in the on-
screen menu or to advance to the next menu.
If you press the VOL(ume) { button when the
sound is muted, the volume bar will appear on
the screen. Pressing the VOL(ume) B button
when the sound is muted will restore the sound.
FM Button
Press to select FM mode. Press again to return
to TV mode.
- 5 -
AUDIO VIDEO EARPHONE MENU VOLUME CHANNEL POWER
MENU VOLUME CHANNEL POWER
S
ETTING
U
P AND
U
SING
Y
OUR
TV
Connect the AC cord
(supplied) to the AC 120V jack
on the back of the TV. Then,
plug the power cord into an
operating AC outlet.
Press the POWER button to
turn on the TV.
Press the VOLUME
▲/▼ buttons to adjust
the sound level.
Press the CHAN-
NEL ▲/▼ buttons to select
available TV channels. (See
Auto Install above.)
T ELEVISION
The current
channel number
will appear briefly
when the TV is first
turned on and with
channel changes. To
display the channel
number for five sec-
onds, press the STA-
TUS/EXIT button on
the remote control.
You can turn on the
TV by pressing the
CHANNEL ▲ or ▼
button on the front
of the TV. The
CH(annel) ▲/▼ but-
tons of the remote
control will not turn
on the TV power.
S MART
H ELP
Notes:
• You can connect earphones (not supplied)
to the EARPHONE jack on the front of
the TV for private, personal listening.
Press the MENU button
to display the TV’s on-screen
menu.
Press the CHANNEL ▲/▼
buttons to select an item in the
menu.
Press the VOLUME ▲/▼ but-
tons to adjust an item in the
menu or to advance to the next
menu.
Note: To remove the menu,
press the CHANNEL ▲/▼ but-
tons to select EXIT. Then, press
the VOLUME ▲ or ▼ button.
(You may need to select EXIT
repeatedly to completely remove
all of the menus.)
Or, press the MENU button,
repeatedly if necessary, to
remove the MENU.
Remote Sensor
Point the remote
control here when
using the remote to
work the TV.
A UTO I NSTALL
F ollow these steps to quickly
add area channels into the
TV’s memory. Before you
begin, make sure batteries are
in the remote control and you
are familiar with the remote.
Press the CH(annel) ▲
or ▼ button to select SETUP.
Then, press the VOL(ume)
B
or { button to continue
to the SETUP menu.
Press the CH(annel) ▲ or
▼ button to select AUTO
INSTALL. Then, press the
VOL(ume) B or { button to
enter AUTO INSTALL, which
will set up the channels.
When setup is complete, the
SETUP menu will reappear for
about 30 seconds, then the low-
est stored channel will appear.
Now, when you press the
CH(annel) ▲ or ▼ button, you
will only scan through channels
that are
available. You still may select
non-memorized channels by
pressing the Number buttons.
Press the POWER
button to turn on the TV.
Make sure you are not in A/V
IN mode. (Press the TV/AUX
button so that A/V IN does not
appear on the screen.)
Press the MENU but-
ton. The main menu appears
on the TV screen.
EXIT B
LANGUAGE ENG
AUTO INSTALL B
CHANNEL EDIT B
FM ANTENNA INT
AUTO STORE 31
SETUP B
EXIT B
BRIGHTNESS 24
COLOR 31
PICTURE 31
R EMOTE
T o load the batteries into the
remote:
1. Slide off the battery
compartment lid on the
bottom of the remote
control.
2. Insert two AA batter-
ies (supplied) into the
battery compartment
as indicated inside the
compartment. Installing
batteries incorrectly may
damage the remote
control.
3. Replace the lid.
Point the remote control
toward the remote sensor on the TV
when operating the TV with the remote.
(See Television illustration below.)
Battery
Compartment
Lid
Battery
Compartment
3 2 1
6 5 4
9 8 7
0
POWER
STATUS/EXIT
ALT. CH FM
SLEEP TV/AUX
MENU MUTE
VOL. VOL.
CH.
CH.
Complete each
step within 30 sec-
onds of the previ-
ous step.
S MART
H ELP
TV/AUX Button
Press to select A/V IN (for viewing video play-
back at the TV from a VCR, camcorder, DVD
Player, etc.). Press again to return to TV chan-
nels. Details are on page 4.
PR0930x4 3/1/02 10:21 AM Page 5