Peavey Impulse 100P - Manual (Page 12)

12
The enclosure shall be constructed of injection-molded polypropylene of 1/4" nominal thickness with a UL flame
rating, and reinforcing ribs internally. A handgrip shall be molded-in on the top rear edge.
A vinyl coated perforated metal grille shall be provided for woofer protection. The cabinet shall incorporate four
tall sturdy rubber feet for floor standing use, and four mounting point inserts, on the top and bottom each, for
flying use.
The outside dimensions shall be: 18.88" tall (17.63" rear) by x 14.00" wide (8.25" rear) by x 13.13" deep, and the
weight shall be 35 lbs. Power requirements shall be: 100 Watts Nomimal, 120VAC, 60 Hz Domestic and 240 VAC,
50 Hz (European). The loudspeaker system shall be called a Peavey Impulse
® 100P.
20 50 100 200 500 1k 2k 5k 10k 20k
Frequency (Hz)
60
70
80
90
100
110
dB
SPL
(re
20
Pa)
Amplitude Response (1W 1m On-Axis)
Figure 1
F Frre eq qu ue en nccy y rre es sp po on ns se e