Philips LX3900SA - Manual (Page 37)

37
3139 115 22871
English
Other Functions
Switching on/off
Switching to active mode
● Press the SOURCE control to select :
DISC ™ FM ™ MW™ TV ™ AUX ™
DI ™ DISC ....
OR
Press DISC, TV, TUNER or AUX/DI on
the remote.
Switching to Eco Power standby
mode
● Press STANDBY ON (B).
➜ The display screen will go blank.
Using the remote to operate
your ‘Philips’ television
1
3
2
2
4
1
Press and hold TV to turn on your TV.
2
Press
¡1 / 2™ or use the numeric
keypad (0-9) to select the TV’s channel.
3
Press TV VOL +/- to adjust the TV’s
volume level.
4
Press and hold B to turn off your TV.
Helpful Hint:
– When listening to TV or AUX/DI
programmes, press the respective TV or
AUX/DI button on the remote in order for
the sound to be heard.
Recording to an external
device
1
Connect the external recording device to
LINE OUT. (See page 12 “Connections-
optional“).
2
Select the source to record from your
DVD system (DISC, TUNER, TV or
AUX/DI) and start playback (if
necessary).
3
For ultimate recording, press SOUND
to select ‘CLASSIC’ or ‘CONCERT’ and
press
SURR to select ‘STEREO’.
4
Start recording on the external recording
device.
Helpful Hint:
– Refer to the owner’s manual of the
connected equipment for details.
Setting the Sleep timer
The sleep timer enables the system to
switch to Eco Power standby mode
automatically at a preset time.
● Press SLEEP on the remote repeatedly
until it reaches the desired preset turn-off
time.
➜ The selections are as follows (time in
minutes):
15 ™ 30 ™ 45 ™ 60 ™ OFF ™ 15…
➜
SLEEP will show on the display panel,
except if " OFF" is selected.
➜ Before the system switches to Eco
Power standby mode, a countdown of 10
seconds is displayed.
" SLEEP10" ™ "SLEEP 9".... ™
"
SLEEP1" ™ "SLEEP"
To cancel the sleep timer
● Press SLEEP repeatedly until " OFF"
appears or press the STANDBY ON
(B) button.
001-041-LX39-22-Eng1 12/12/2003, 10:21 AM 37