Philips SPC1005NC - Manual (Page 10)

Chapter EN
10
Connecting the WebCam to your PC /
laptop
1 Be sure to run the installation CD first, before connecting
the WebCam to the PC / laptop.
2 Turn on the PC / laptop.
3 Connect the USB connector of the USB cable to the USB
port of the PC / laptop.
> The WebCam will now derive its power from the PC / laptop.
4 Aim the webcam as required.
5 Use the clamp and the two rubber rims to attach the
WebCam to your (flat panel) PC monitor or laptop screen.
• Fold the clamp to place the WebCam on a desk or (large)
desktop monitor.
Installation
3
3
5
5