PYLE Audio PCA4 - Manual (Page 6)

Specifications are typical; individual units might vary.
Specifications are subject to change and improvement without notice.
Specifications
5 - Pyle Pro PCA4 Manual
Output Power, 2 channels driven
4-Ohm, 1 kHz, 1% THD .............................................................................. 20Wx2
4-Ohm, 1 kHz, 10% THD ............................................................................. 32Wx2
Max Power ................................................................................................. 120Wx2
Total Harmonic Distortion, 1 kHz Rated Power ................................................ 0.3%
Input Sensitivity, 1 kHz, 4-Ohm Rated Power
LINE ............................................................................................................ 220mV
CD ............................................................................................................... 220mV
Frequency Response ........................................................................... 20Hz-20kHz
Signal to Noise Ratio, 1 kHz, 4-Ohm Rated Power
LINE ............................................................................................................... 75dB
CD .................................................................................................................. 75dB
Tone Controls
BASS ............................................................................................. +/-10dB, 100Hz
TREBLE ......................................................................................... +/-10dB, 10kHz
Power Requirement ................................................. 120V AC 60Hz/230V AC 50Hz
Power Fuse ......................................................... 1.5 A, 250V fast-acting, 5x20mm
Dimensions, inches (mm) WxHxD ..................... 8.27 x 2.72 x 5.39 (210 x 69 x 137)
Weight, lbs (kg) ........................................................................................ 5.32(2.42)