PYLE Audio PLCD67 - Manual (Page 5)

5
To Reinstall the Front Panel
1. When the panel bracket is in slide
down position, insert the front panel
into panel bracket and press
OPEN/CLOSE button to slide up.
2. When the panel bracket is in slide up
position, insert a side of the front
panel to its proper position and push
the other side into the panel bracket,
a ‘click’ sound should be heard.
3. Note that if the front panel fails to lock
in position properly, press control
button may not function and LCD
display may be missing some
segments. Press the OPEN/CLOSE
button and then reinstall the front
panel again.
USING THE DETACHABLE FRONT PANEL
To Detach the Front Panel
1. Press the OPEN/CLOSE button, the
front panel will slide down.
2. Press the OPEN/CLOSE button again,
the front panel will slide up.
3. When the front panel slides down,
press the bottom button of the front
panel upward and pull it out from the
panel bracket.
4. For safekeeping, store the front panel
in the supplied protective case
immediately after being removed.
Open/Close
Open/Close
Bottom
Button
Bottom
Button
Protective Case
Front Panel
Front Panel