PYLE Audio PLCD12MRKT - Manual (Page 12)

RADIO OPERATION
• BAND SELECTION
At tuner mode, press BAND button
(18) shortly to select the desired band.
The reception band will change in the
following order:
• STATION SELECTION
Press button (16) or button (17)
shortly to activate automatic seek
function. Press for more than 3 seconds
until “MAN” appeared on the display,
the manual tuning mode is selected. If
both buttons have not pressed for
several seconds, they will return to
seek tuning mode and “AUTO”
appeared on the display.
• AUTOMATICALLY MEMORY
STORING & PROGRAM SCANNING
- Automatic memory storing
Press AS/PS (ELAPSE) button (2)
for more than 2 seconds, the radio
searches from the current frequency
and checks the signal strength until
6 strongest stations are stored into
the corresponding preset number
button. When all completed, it will
change to scan preset station
automatically.
- Program scanning
Press AS/PS (ELAPSE) button (2)
shortly to scan preset station. The
radio is holding at that preset
number for several seconds, and
then searches again. Press AS/PS
(ELAPSE) button (2) again to stop
scanning when desired station is
reached.
• STATION STORING
Press any one of the preset buttons
(14) (M1 to M6) (i.e.19~24) to select a
station which had been stored in the
memory. Press this button for several
seconds, current station is stored into
the number button.
• SCAN
Press SCAN button (13) to scan
through strong stations in the current
band. Radio pauses for five seconds
at each strong station. At each time
the frequency is flashing on the display.
Press SCAN button (13) again to listen
to current station.
• SELECTABLE FREQUENCY
SPACING (FOR USA VERSION ONLY)
Programs the unit for USA or European
radio frequency spacing. While in radio
mode, pressing and holding BAND
button (18) and then pressing button
(17) or button (16) toggles between
USA or European frequency spacing.
- Pressing and holding BAND button
(18) and then pressing button (17)
selects USA frequency spacing.
- Pressing and holding BAND button
(18) and then pressing button (16)
selects European frequency spacing.
* USA radio spacing is 200k for
FM and 10k for AM. This is the
default frequency spacing.
* European radio spacing is 50k
for FM and 9k for AM.
12
OPERATION
FM1 FM2 FM3 AM1
AM2