Basic playback and recording, Switching on for the first time, Switch the power to _ on – Pioneer PDR-509 User Manual
Page 15: Press open/close 0 to open the disc tray, Load a pre-recorded audio cd, Press open/close 0 to close the disc tray, Press 3 (play) to start the disc playing, When you're done, press 7 (stop)
15
Basic Playback and Recording
Basic Playback and Recording
◊ÛB-.?/
MONITOR
INPUT
SELECTOR
TIME
1
Switching On for the First Time
The next few pages take you through switching on the PDR–509, playing discs and using the basic playback controls, as well
as basic recording. Before proceeding with this section you should have at least connected your recorder to an amplifier. (If you
haven't, turn to pages 10 and 11 for more on connecting the PDR–509 to other components in your system.)
1
Switch the POWER to
_ ON.
The function indicator flashes, and the main display panel lights.
❖
Also make sure that your amplifier is switched on and the input
function set to the PDR–509.
2
Press OPEN/CLOSE
0 to open the disc tray.
3
Load a pre-recorded audio CD.
Place the disc in the disc tray label-side up.
❖
The disc tray has guides for both
CD
singles
(8cm/ 3 inch) and regular
CD
s (12cm/ 5 inch).
Do not use an adaptor when playing
CD
singles: it could damage the recorder.
❖
Never load more than one disc at a time.
4
Press OPEN/CLOSE
0 to close the disc tray.
Once the recorder has found out what's on the disc you should see a
display that looks something like this:
❖
Lightly pushing the tray or pressing
3 (play) will also close the disc tray.
(If you press
3 to close the tray, you won’t see the above display.)
5
Press
3 (play) to start the disc playing.
❖
Pressing the jog dial on the front panel also starts playback.
❖
To temporarily pause playback, press
8 (pause). To resume playback,
press either
8 (pause) again, or 3 (play). If the recorder remains
paused for 10 minutes, it reverts to stop mode.
❖
Press and hold the
1 (fast reverse) and ¡ (fast forward) buttons to
search through tracks in either direction at high speed.
6
When you're done, press
7 (stop).
❖
Take out the
CD
from the disc tray before switching off the unit.
Number of tracks on disc
Total playing time of disc
Indicates a
pre-recorded disc
DIGITAL
REC LEVEL
ANALOG
REC LEVEL
REPEAT
5,6
2,4
RANDOM
FINALIZE
ERASE
TIME
FADER
REPEAT
CHECK
PROGRAM
CLEAR
DIGITAL
SYNCHRO
INPUT
SELECTOR
SKIP
PLAY
SET
SKIP ID
CLEAR
AUTO/
MANUAL
TRACK NO.
WRITE
REC
1
2
3
4
5
6
7
8
9
10/0
>
10
7
8
3
1
¡
4
¢
Î
COMPACT DISC RECORDER
REMOTE CONTROL UNIT
5,6
5