Philips 248X3LF User Manual

Page 9

Text mode
Original mode

2. Setting up the monitor

2.3 Remove the Base Stand

Remove the Base Stand

Before you start disassembling the monitor base,
please follow the instructions below to avoid
damage or injury.

1. Place the monitor face on a safe surface, then

loose the screw form the base.

Physical Function

Tilt

Resolution notification

This monitor is designed for optimal performance
at its native resolution, 1920x1080@60Hz.
When the monitor is powered on at a different
resolution, an alert is displayed on screen: Use
1920x1080@60Hz for best results.
Display of the native resolution alert can be
switched off from Setup in the OSD (On Screen
Display) menu.

20˚

-5˚

2. Release the screw of base stand then pull the base

away from the monitor.