Philips 34PW850H/37 - Manual (Page 13)

M
ONITOR
O
UT
(
PUT
) C
ONNECTIONS 11
T he Audio/Video (Monitor) Output
jacks are great for recording with
a VCR or used to connect an exter-
nal audio system for better sound
reproduction.
AUDIO SYSTEM
CONNECTION:
1 Connect one end of the
R(ight) and L(eft) AUDIO
(Monitor Out) jacks on the TV
to the R and L audio input jacks
on your amplifier or sound sys-
tem. Set the audio system’s vol-
ume to a normal listening level.
2 Turn the TV and audio sys-
tem ON. To adjust the volume
on the audio system, you will
need to change the volume at
the external audio system, not
the television.
SECOND VCR CONNECTION:
NOTE: Refer to panel number 6 for
the proper hookup of the first VCR.
Follow the instructions on how to
tune to the AV1 channel to view a
pre-recorded tape.
The following steps allow you to
connect a second VCR to record
the program while your watching
it.
3 Connect one end of the yellow
Video Cable to the Monitor
Out VIDEO plug. Connect the
other end to the VIDEO IN plug
on the second VCR.
4 Connect one end of the red
and white Audio cable from
the Monitor Out AUDIO L and
R plugs on the TV to the
AUDIO IN plugs on the VCR.
5 Turn the Second VCR ON,
insert a VHS tape and it’s
ready to record what’s being
viewed on the TV screen.
AUX/TV INPUT
PHONO INPUT
R L
1
2
Back of TV
Audio Cables
(Red and White)
ANTENNA OUT
ANTENNA IN
VIDEO AUDIO
IN IN
OUT OUT
L R ANTENNA OUT
ANTENNA IN
VIDEO AUDIO
IN IN
OUT OUT
R L
3
3
4
5
4
Back of TV
Audio
Cables
1st VCR
(refer to panel 6 for
proper connection)
Video
Cable
2nd VCR with Audio and
Video Input Jacks
SECOND VCR CONNECTION:
AUDIO SYSTEM CONNECTION: