Premier Mounts MOUNTS PSD-BWL - Manual (Page 21)

RTM-L Addendum
Page – 13 – Installation Instructions
RTM-L ADDENDUM:
The RTM-L is shipped with the hand crank in the storage position. The hand crank must be removed
in order for the RTM-L to be adjusted. After the adjustments have been made, return the hand crank
to the storage position. If the hand crank is not returned to the storage position, it may cause damage
to the unit or other equipment. Please return the hand crank to the storage position after operation.
Hand Crank
(Qty 1) 5/32”Allen Wrench
(Qty 1)
Storage Position
Loosen the M8 set screw using the 5/32”
Allen wrench. Remove the hand crank. Operating Position
Once the hand crank has been removed, turn the hand crank
around so that the hand crank knob is pointing away from the
unit. Place the hand crank back onto the unit and tighten the
set screw with the 5/32” Allen wrench.
Storage Position
Slide the hand crank back onto the RTM-L
and tighten the set screw using the 5/32”
Allen wrench.
Hand Crank
Knob
Hand Crank
Set Screw
5/32” Allen Wrench