Pioneer DV-466-S - Manual (Page 15)

Connecting up 02
15
En
Connecting to an AV receiver
To enjoy multichannel surround sound you
need to connect this player to an AV receiver
using a digital output. This player has both
coaxial and optical digital jacks; use which-
ever is convenient.
In addition to a digital connection, we recom-
mend also connecting using the stereo
analog connection.
You’ll probably also want to connect a video
output to your AV receiver. You can use any of
the video outputs available on this player (the
illustration shows a standard (composite)
connection).
1 Connect one of DIGITAL AUDIO OUT
jacks on this player to a digital input on
your AV receiver.
This enables you to listen to multichannel
surround sound.
For an optical connection, use an optical
cable (not supplied) to connect the
OPTICAL
DIGITAL AUDIO OUT jack to an optical input
on your AV receiver.
For a coaxial connection, use a coaxial cable
(similar to the supplied video cable) to
connect the
COAXIAL DIGITAL AUDIO OUT
jack to a coaxial input on your AV receiver.
2 Connect the analog AUDIO OUT L/R
and VIDEO OUT jacks on this player to a
set of analog audio and video inputs on
your AV receiver.
The diagram shows standard video connec-
tions, but you can alternatively use the
S-video or component video connections if
they’re available.
3 Connect the AV receiver’s video
output to a video input on your TV.
• You usually have to connect the same
kind of video cable between your DVD
player and AV receiver, and between your
AV receiver and TV.
• My TV doesn’t have any inputs to connect
the DVD player. How can I watch DVDs?
If your TV has no inputs you can’t use this
player with it.
DIGITAL AUDIO OUT
S
L
R
P R
P B Y
COAXIAL
OPTICAL COMPONENT VIDEO OUT
AUDIO OUT
VIDEO OUT
AV receiver
DIGITAL IN
(OPTICAL)
DIGITAL IN
(COAXIAL)
DIGITAL AUDIO OUT
S
L
R
P R
P B Y
COAXIAL
OPTICAL COMPONENT VIDEO OUT
AUDIO OUT
VIDEO OUT
AV receiver AUDIO/
VIDEO IN
DV260.book 15 ページ ２００３年１月２８日 火曜日 午後７時２０分