Philips SBC SC940 - Manual (Page 6)

ENGLISH 7
Maintenance
Replacing the lamp
1 Open the lamp compartment (8) by turning the coin slot counter-
clockwise.Approx. 1/4 turn. For this use a coin.
2 Take out the lamp.
3 Remove the isolating tube from the old lamp and place it on the new lamp.
4 Insert the new lamp into the lamp compartment.
5 Put the lamp compartment cover back in place.
6 Close the lamp compartment (8) by turning the coin slot
clockwise.Approx. 1/4 turn. For this use a coin.
Replacing the batteries
1 Open the battery compartment (7) by turning the coin slot counter-
clockwise.Approx. 1/4 turn. For this use a coin.
2 Insert four AA batteries, noting the + and - configuration inside the battery
compartment.
3 Put the battery compartment cover back in place.
4 Close the battery compartment (7) by turning the coin slot
clockwise.Approx. 1/4 turn. For this use a coin.