Poulan PP6000H - Manual (Page 7)

7
ADJUSTING THE CUTTING ANGLE
WARNING:
Never attempt to adjust
the cutting angle when the engine is running.
Always release the throttle trigger, wait until
the blade stops moving, move the powerhead
ON/OFF switch to the OFF position, and dis-
connect spark plug (or disconnect from pow-
er source) before making adjustments.
Adjust the angle of the trimmer to suit the area
you are trimming. Adjust the blade as follows:
1. Use one hand to grasp the angle adjust-
ment holder.
2. Loosen the fixed screw by using a wrench
to turn it counterclockwise.
3. When the blade is in the desired position,
turn the fixed screw clockwise to secure
the blade.
Angle Adjustment
Track
Fixed
Screw
Angle Adjustment Holder
MAINTENANCE
WARNING: Always stop unit and dis-
connect spark plug wire (or disconnect pow-
erhead from power source) before performing
maintenance.
BLADE MAINTENANCE
WARNING:
The blade moves mo-
mentarily after the trigger is released.. To
avoid serious injury, make sure the blade has
stopped moving and disconnect the spark
plug (or disconnect powerhead from power
source) before performing work on the blade.
WARNING: Always replace a blade
that is bent, warped, cracked, broken, or
damaged in any other way. Never attempt to
straighten and reuse a damaged blade. Use
only specified replacement blade. Wear pro-
tective gloves when handling or performing
maintenance on the blade to help avoid injury.
S For easier operation and longer blade life,
lubricate the blade before and after each
use.
S Apply a light machine oil along the edge of
the top strap as shown.
Top Strap
OIL
STORAGE
WARNING: Perform the following
steps after each use:
S
Allow attachment and gearbox to cool be-
fore storing or transporting.
S Position attachment so that any sharp ob-
ject cannot accidentally cause injury.
S Store the attachment in a dry, well venti-
lated area out of the reach of children.
SEASONAL STORAGE
Prepare attachment for storage at end of sea-
son or if it will not be used for 30 days or more.
If your hedge trimmer attachment is to be
stored for a period of time:
S
Clean the entire attachment.
S Store in a clean dry area.
S Clean all parts and check for damage.
Have damaged parts repaired or replaced
by an authorized service dealer.
S Keep all nuts, bolts, and screws tight.
S Lightly oil external metal surfaces, includ-
ing the blade.