Warning, Save these instructions – Poulan PP6000H User Manual

Page 4

tion. Plug connectors must be undamaged.

The extension cord used to reach the pow-

er source must be heavy enough to carry

current from the power source the full length

of the extension cord to the unit. An under-

sized extension cord will cause a drop in

line voltage resulting in loss of power and

overheating. If in doubt, use the next heavi-

er gauge. The lower the gauge number, the

heavier the cord.

Do not use multiple cords.

Do not abuse cord. Never carry the unit by

the extension cord or yank extension cord

to disconnect unit. To unplug, grasp the

plug, not the cord. Do not use cord as a han-

dle, close a door on cord, or pull cord

around sharp edges or corners. Do not ex-

pose cords to heat, oil, or water.

Keep the extension cord clear of operator and

obstacles at all times. Tie cord to cord retain-

er and connect to recessed plug as shown

in this manual to prevent damage to unit

and/or extension cord and to reduce the

possibility of the extension cord discon-

necting from the unit during operation.

Do not attempt to repair unit. Inspect the insu-

lation and connectors on the powerhead and

extension cord before each use. If there is

any damage, do not use until damage is re-

paired by your authorized service dealer.

Do not use the powerhead if the switch

does not turn the unit on and off properly.

Have the unit repaired by your authorized

service dealer.

Do not use with damaged cord or plug. If

powerhead is not working as it should, has

been dropped, damaged, left outdoors, or

dropped into water, return it to your autho-

rized service dealer for repair.

Avoid unintentional starting of the unit. Nev-

er carry unit with your finger on the switch.

Be sure the switch is in the OFF position

and never touch the switch when connect-

ing extension cord.

Unplug the unit from the power source when

not in use, before servicing, and when chang-

ing accessories and/or attachments.

Avoid any body contact with any grounded

conductor, such as metal fences, or pipes,

to avoid the possibility of electric shock.

Ground Fault Circuit Interrupter (GFCI)

protection should be provided on the circuit

or outlet to be used for the powerhead. Re-

ceptacles are available having built-in

GFCI protection and may be used for this

measure of safety.

UNIT/MAINTENANCE SAFETY

WARNING:

Disconnect powerhead

spark plug (or disconnect powerhead from

power source) before performing mainte-

nance.
S

Have all maintenance and service not ex-

plained in this manual performed by an autho-

rized service dealer.

Inspect entire unit before each use. Replace

damaged parts. Check for fuel leaks. Make

sure all fasteners are in place and securely

fastened.

Maintain unit according to recommended pro-

cedures.

Keep the cutting blade and air vents free

from debris.

Do not use a cutting blade that is bent,

warped, cracked, broken, or damaged in

any other way. Have worn or damaged

parts replaced by an authorized service

dealer.

Use only recommended Poulan PRO cut-

ting blades and replacement parts and ac-

cessories. Use of any other parts may void

your warranty and cause damage to your unit.

Be sure blade stops turning when engine

idles (see CARBURETOR ADJUST-

MENTS section of powerhead manual).

Hand carry the unit with the engine stopped

and the muffler and cutting blade away from

your body

Keep others away when making carburetor

adjustments.

Never start the unit with the clutch housing re-

moved. The clutch can fly off and cause seri-

ous injury.

If blade strikes a foreign object, follow these

steps: stop unit and disconnect spark plug

wire (or disconnect from power source), in-

spect for damage, and repair any damage be-

fore resuming operation of the unit.

TRANSPORTING AND STORAGE

Do not grasp or hold exposed blade.

Stop powerhead before leaving work area.

Allow powerhead and gearbox to cool before

storing or transporting it in a vehicle.

Store unit and fuel in area where fuel vapors

cannot reach sparks or open flames from wa-

ter heaters, electric motors or switches, fur-

naces, etc.

Store attachment so blade cannot accidental-

ly cause injury.

Store attachment indoors, out of reach of

children.

If situations occur which are not covered in

this manual, use care and good judgment. If

you need assistance, call 1-800-554-6723.

SPECIAL NOTICE:

Exposure to vibra-

tions through prolonged use of gasoline pow-

ered hand tools could cause blood vessel or

nerve damage in the fingers, hands, and

joints of people prone to circulation disorders

or abnormal swellings. Prolonged use in cold

weather has been linked to blood vessel dam-

age in otherwise healthy people. If symptoms

occur such as numbness, pain, loss of

strength, change in skin color or texture, or

loss of feeling in the fingers, hands, or joints,

discontinue the use of this tool and seek med-

ical attention. An anti-vibration system does

not guarantee the avoidance of these prob-

lems. Users who operate power tools on a

continual and regular basis must monitor

closely their physical condition and the condi-

tion of this unit.

SAVE THESE INSTRUCTIONS

This manual is related to the following products:

545186848 952711674