Out-swing, In-swing, Out-swing sill in-swing sill – Pella Wood Hinged Patio Door 818K0100 User Manual
Page 10
6"
16" MAX
O.C.
16" MAX
O.C.
16" MAX
O.C.
16" MAX
O.C.
6"
6"
6"
6"
6"
6"
6"
OUT-SWING
DOUBLE OPERABLE
6"
6"
16"
MAX.
O.C.
5A
6"
6"
16"
MAX.
O.C.
5A
5B
5E
16" MAX
O.C.
16" MAX
O.C.
6"
6"
6"
6"
IN-SWING AND OUT-SWING
SINGLE FIXED OR OPERABLE
6"
6"
16"
MAX.
O.C.
6"
6"
16"
MAX.
O.C.
5A
5A
5B
5E
DIAGRAM FOR
PLACEMENT OF
FRAME SCREWS &
INSTALLATION CLIPS
5
INSTALL THE PERFORMANCE UPGRADE
OR HURRICANESHIELD FASTENERS
PERFORMANCE UPGRADE & HURRIC
ANESHIELD DOORS •
PERFORMANCE UPGRADE
Frame Screw Method:
Note: If installing with installation clips,
proceed to Step E.
A. Jambs:
Out-swing: On the room side of the jamb;
drill and counter-sink 13/64" deep diameter
clearance holes through the door frame
only and not into the rough opening in the
locations shown. (See Out-Swing diagram in
lower right).
In-swing: Open door panels; drill and
counter-sink 13/64" deep diameter clearance
holes through the door frame only and not
into the rough opening in the locations shown.
(On hinge jambs; clearance hole locations are
centered between hinges).
Hinge Jambs: See
(5A) In-Swing diagram
(upper right). Fixed and
Lock jambs diagram for
placement of threshold
screws and installation
clips (see out-swing
diagram in lower right).
5A
5A
Out-Swing
INTERIOR
EXTERIOR
In-Swing
EXTERIOR
EXTERIOR
EXTERIOR
INTERIOR
INTERIOR
INTERIOR
Fixed
Placement
Vent
Placement
Fixed
Placement
Drill 13/64" clearance holes
through the frame
Drill 13/64"
clearance holes
through the frame
Vent
Placement
B. Drill 13/64" deep clearance holes through the door frame head only and not into
the rough opening in the locations shown.
C. Drill 1/8" x 1" deep pilot holes through the clearance holes and into the rough
opening framing in the head, jambs, and threshold of the unit frame.
Note: Be certain to shim between jambs and rough opening at all screw locations.
In-Swing Sill
Out-Swing Sill
Screw
Location
Out-Swing Sill
In-Swing Sill
6"
16" MAX O.C.
16" MAX O.C.
6"
6"
6"
5A
6"
16" MAX O.C.
16" MAX O.C.
6"
6"
6"
In-Swing
Clearance
Hole
Location
Clearance
Hole
Location
Clearance
Hole
Location
Clearance
Hole
Location