Premier Mounts Clevis Mount CTM-MS1 - Manual (Page 10)

CTM-MS1
Page - 10 - Installation Manual
CTM-MS1 Installation
16"
16"
Step 1. Using a (commercially available) wood stud finder,
locate the 16" or 24" stud centers behind the wall.
Step 2. Once found, make a pencil marking on the center of the
wood
studs.
Step 3. Place the wall plate to the reference line and mark the
nine (9) lag bolt mounting points through the wall plate
slots on the wall.
The wall plates have 16" and 24" mounting slot positions.
Wood studs
behind the
wall
structure.
Wood Stud Finder
(Commercially available)
Measure and
mark the
viewing height
desired on the
wall.
Mark the wall
and the center
of the wood
studs.