Plinius Audio Anniversary Integrated Amplifier - Manual (Page 14)

13 INTEGRATED AMPLIFIER
Installation & Operation
WARNING: RISK OF ELECTRIC SHOCK
This amplifier operates at hazardous voltage levels. We recommend that any work
requiring removal of the lid be referred to a suitably qualified and experienced service
technician. DO NOT place this amplifier in any position where liquids or any foreign
material may accidentally enter it.
PLEASE READ & UNDERSTAND THE PRECAUTIONS WITHIN THIS MANUAL
FOR PLACEMENT & OPERATION OF THIS PRODUCT.
CONNECTIONS
Connections to your Anniversary Integrated Amplifier should be made in the same
order as they are listed in this section. DO NOT attempt to connect your Anniversary
Integrated Amplifier until you have read and fully understood these instructions.
Should you require further assistance, please contact your Plinius dealer.
DO NOT POWER UP YOUR AMPLIFIER UNTIL YOU HAVE CONNECTED
YOUR INPUT/OUTPUTS CORRECTLY FOR YOUR SYSTEM.
SOURCE COMPONENT INPUTS
Connect your Source to the input of the Anniversary Integrated Amplifier using
suitable single-ended RCA or Balanced XLR interconnect cables only. For RCA, make
sure you connect the red coded cable to the red RIGHT RCA input, and the white
cable to the white LEFT RCA input. Also make sure the RCA connectors are a snug fit
and are inserted all the way in.
For CD XLR input connection, make sure you connect the RIGHT XLR input and LEFT
XLR inputs to the right and left outputs from your source respectively. Also make sure
the XLR connectors click into place. Use the input selection switch to select RCA if
you are using RCA inputs or to select XLR if you are using XLR inputs.
NOTE: DO NOT connect XLR and RCA at the same time, use only one or the other. The
phono input should be connected to a suitable source turntable only.
ANNIVERSARY CD PLAYER INTEGRATED AMPLIFIER
CD INPUTS