Philips CPWUA054 - Manual (Page 43)

Problem Possible cause Solution
NETWORK CONNECTION PROBLEMS
If the Link LED on PC or other network Make sure the computer and other network
the Wireless USB devices switched off. devices are receiving power.
Adapter 11g does not
light, or if you cannot
access any network
resources from the
computer.
No access to a Service unavailable. Check that you have enabled and configured the
Windows or Net- service correctly.
Ware service on the If you cannot connect to a particular server, be
network. sure that you have access rights and a valid ID and
password.
If you cannot access the Internet, be sure you have
configured your system for TCP/IP.
If your wireless Base Station / Access Make sure the access point that the station is
adapter cannot Point is switched off. associated with is powered on.
communicate with a
computer in the
Range too long Reposition your Wireless Adapter.
network when (weak radio signal).
configured for
Infrastructure mode.
Wrong settings Make sure the SSID and the network encryption
key are the same as those used by the wireless
access point.
Network speed USB 1.1 port used Connect the wireless adapter to a hi-speed
does not in stead of USB 2.0. USB 2.0 port for maximum speed.
exceed 11 Mbps.
Other network Make sure all network components are suitable for
components are high network speeds.
unsuitable for higher
network speeds.
ENGLISH 43