Planar PT1501MX - Manual (Page 24)

22
Using the RS232 connection:
1. Be sure that RS232 cable is connected from the computer.
2. Power on the computer.
3. Load the touch screen driver CD.
4. Follow the step-by-step instructions as shown on pop-up windows.
Using the USB connection:
1. Be sure that USB cable is connected from the computer.
2. Power on the computer.
3. Load the touch screen driver CD.
4. Follow the step-by-step instructions as shown on pop-up windows.
If you are using a PC running Windows
®
VISTA, follow the instructions below:
Using the RS232 connection:
1. Be sure that RS232 cable is connected from the computer.
2. Power on the computer.
3. Load the touch screen driver CD.
4. Follow the step-by-step instructions as shown on pop-up windows.
Using the USB connection:
1. Be sure that USB cable is connected to the computer.
2. Power on the computer.
3. No need to install USB driver from the CD as it is a HID device. The
system will recognize the HID device and load the driver automatically. If
the touchscreen is out of calibration, double click on the HID calibration
utility* and do the 4 points calibration.