Start your installation – Planar PT1501MX User Manual

Page 12

Start Your Installation

Remove the Back Cover

Please follow these instructions to remove the cover on the back panel of the

LCD so that you can hookup the cables to associated connector.

Figure A.

1. To remove the back cover, follow the arrows in Figure A and pull out with

your fingers and the cover should be removed from the stand.

2. Follow the instructions on P. 12 ( Figure 11.1 ) to connect the cables to the

appropriate connectors.

3. Attach the cover back to the LCD stand by pressing firmly until the tabs

snap into place. You may also keep the cables in order by using the cable

organizer.