Pure Acoustics DMX-50 - Manual (Page 18)

Gr
eat Britain
16
Listening to a connected device
To listen to an audio source such as an iPod or MiniDisc player attached to the AUX 1
or AUX 2 inputs on your DMX-50 press the AUX1/2 button or press the Mode button
on the remote until you see AUX 1/2 in the top left of the screen. The date and time
obtained from the DAB or FM (RDS) signal are also displayed on screen when your
DMX-50 is in Auxiliary mode.
Adjusting the volume of your connected device
It is recommended that you set the volume on your connected device quite
high then use the volume control on your DMX-50 to control the volume
through your speakers/headphones.
If you find that you need to turn your DMX-50 up quite loud you can alter the
gain (amplification) applied to the auxiliary inputs using the AUX1 or AUX2
setup options.
To adjust the auxiliary input gain in AUX mode:
1. Press the MENU button, and select the AUX(1 or 2) menu option
2. Turn the TUNE/SELECT dial or use the / buttons on the remote to
move the gain level between 0 and 12 dB (4 times as loud).
3. Press the TUNE/SELECT dial to select a value and exit.
Au x i l i a r y i n p u t 1
3 0 / 0 9 / 0 5
AU X 1
1 1 3 9
1 1 : 3 9
AUX mode
AUX IN 2
AUX IN 1
LINE/SUB
OUT
DO NOT EXPOSE TO RAIN OR MOISTURE
/ AUDIO OUT
AUX IN 2
AUX IN 1