Philips ACT101M/17 - Manual (Page 40)

40
Select the language
You can change the language selection after the
first time setup.
1
From Home screen, go to >
[Device] > [Language].
2
Press , , and to select the desired
language.
About the device
From Home screen, go to > [Device] >
[Information]. You can learn the following
information about the device:
[Firmware
version:]
current firmware version.
Always check the firmware
version when updating firmware
from the support website.
[Model:] model number
[CTN] Full product name. Always check
the full product name when
updating firmware from the
support website.
[Support
site:]
web site that provides support
for the device
Restore factory settings
You can restore Activa to factory settings.
1
From Home screen, go to >
[Device] > [Reset].
2
As prompted, press , , and to
restore factory settings.
All settings on Activa are restored to »
factory settings.
Files transferred to Activa are retained.
»
To set the clock
1
Go to > [Device] > [Date and time].
2
In [Date and time], press / to select an
option; press to return to the previous
screen.
In • [Time zone]: select the time zone
where you are located;
In
• [Set time format]: select a 12-hour
or 24-hour clock;
In
• [Set time]: press / repeatedly,
or press and hold / to enter
desired digits; press to select the
position of entries;
In
• [Set date format]: select a date
format;
In
• [Set date]: press / repeatedly,
or press and hold / to enter
desired digits; press to select the
position of entries;
Slideshow settings
From Home screen, go to • >
[Device] > [Slideshow settings].
Or, on the picture play screen, press
BOOST > [Slideshow settings].
[Time per
slide]
selects play time for each slide.
To play slides one by one
manually, select [Manual advance].
[Repeat] plays all slides repeatedly, if
activated.
[Play
order]
[Random]: plays all slides in
random order, if activated.
[Date]: plays all slides in the
chronological order by file
creation date.
[Filename]: plays all slides in the
alphabetical order by file name.
EN