Precor Strength-Training Fitness Equiptment S3-19 - Manual (Page 9)

S3.19 Assembly and Maintenance Guide
page 9
1 2 3 4 5 6
Step 1. Assemble Main Structure
1. Assemble Main Structure
A. Attach the Main Base to the Rear Crossbar using
two 4¾-inch hex head bolts
four flat washers
two locknuts
B. Install the Rear Upright to the Main Base using
two 4¾-inch hex head bolts
four flat washers
two locknuts
Note: Position the uprights so the Shroud mounts
face the center of the unit.
C. Attach the Main Upright to the Main Base
using
two 2¼-inch hex head bolts
four flat washers
two locknuts
2 - 4¾" bolts
4 - washers
2 - locknuts
B
A
2 - 4¾" bolts
4 - washers
2 - locknuts
2 - 2¼" bolts
4 - washers
2 - locknuts
C
Rear Crossbar
Main Base
Rear Upright
Main Upright
Main Base
Shroud
Mounts