Philips Spectra 8895XL - Manual (Page 8)

ENGLISH 15 ENGLISH 14
◗ The block display in the charge meter
indicates how much power is left in the
battery.
Charging Stand Clock
To set time
C
1 Turn clock module, located on underside
of stand, counterclockwise to remove
from stand.
C
2 Press small, left button to set correct time.
C
3 Replace clock module into underside of
stand.Turn clockwise to secure in place.
To replace clock battery
C
1 Turn clock module counterclockwise and
remove from stand.
1 2
1
2
1
2
C
2 Remove battery cover and then use a flat-
bladed screwdriver to lift out the battery.
C
3 Replace battery with 1.5V button cell
watch battery, placing rounded side of
battery into battery compartment, flat side
(+) facing out. Replace battery cover.
C
4 Replace clock module into stand and turn
clockwise to secure in place.
Before first use
◗ Charge the razor before you start using it
(see ‘Charging’).
◗ Remove any sticker or protective foil from
the LED Display.
Important
◗ Only use the power plug and/or charging
stand provided to charge the razor.
◗ The charging plug transforms 100 – 240V AC
to 12V DC.
1 2
8894_95XLDFUwspanish.qxd 5/28/04 10:21 AM Page 14