Philips Spectra 8895XL - Manual (Page 11)

ENGLISH 21
◗ Do not use razor if combs are damaged or
broken. Facial injury may occur.
Every Week: Razor Heads
C
The easiest and most hygienic way to clean the
razor heads is to rinse them every week with
hot water: Water from the tap should be on a
hot setting, BUT BE CAREFUL TO TEST
WATER FIRST SO AS NOT TO BURN OR
SCALD HANDS.
◗ Regular cleaning guarantees better shaving
results.
◗ You may also quickly rinse your razor heads
after each use.
1 Always turn razor OFF, unplug from outlet
and remove cord from razor or charging
stand before cleaning.
C
2 2 Press the Razor Head Release Button, flip
open the Razor Head Assembly.
C
3 Clean razor heads and hair chamber by
running under hot water.
4 Close the Razor Head Assembly and shake
off excess water.
C
5 Open Razor Head Assembly again and
leave open to air dry.
ENGLISH 20
C
4 Put the protective razor head cap on the
razor to protect razor heads.
Replace Spectra razor heads (model # HQ8)
once a year for optimal shaving results.
Trimming
To groom sideburns and moustache:
1 Turn razor ON.
C
2 Push up Trimmer Slide Switch.
The trimmer can be activated while the razor is
running.
C
3 Hold Trimmer as shown and move in
downward strokes with gentle pressure.
4 Close Trimmer by sliding Trimmer switch
down.
5 Turn razor OFF.
Cleaning
◗ Always switch Razor OFF and remove from
charging stand before cleaning.
◗ Never clean, remove or replace head
assembly while motor is on.
◗ Do not apply pressure to combs. Do not
touch razor heads with hard objects as this
may dent or damage precision-made slotted
combs.
8894_95XLDFUwspanish.qxd 5/28/04 10:21 AM Page 20