Bottom panel – PACKARD BELL W7 User Manual

Page 7

Text mode
Original mode

Bottom Panel

Perform the following steps to remove the bottom panel:

1. Remove nine screws (9xA) and take away the bottom panel.

2. Remove the memory module.
3. Lift out the TV Tuner Mini-PCI card from its slot.
4. Disconnect the antenna cable and the two data cables.
5. Disconnect the TV Tuner data cables from the mainboard.
6. Remove the Mini-PCI Wireless LAN card and disconnect the antenna cable(s).

Fig. 3

Removing the hard disk drive.

Fig. 4

Removing the bottom panel.