Philips GOGEAR SA080308 - Manual (Page 29)

29
English
EN
15 Troubleshooting
If SA080 is not working properly or the display
freezes, you can reset it without losing data:
How do I reset SA080?
Insert a pen tip or other object into •
the reset hole located at the bottom of
SA080. Hold until the player shuts down.
If the reset option is unsuccessful, follow
•
the steps how to recover SA080 with the
Philips Device Manager:
1
On your computer, select Start >
Programs > Philips > Philips MP3 player
> GoGear SA080 Device Manager to
launch the Philips Device Manager.
2
Turn off SA080 before you continue.
3
Press and hold the volume button
while you connect SA080 to your
computer.
4
Keep holding the key until the Philips
Device Manager acknowledges SA080
and enters the recovery mode.
5
On the computer, click the Repair
button and follow the instructions of the
Philips Device Manager to complete the
recovery process.
6
When the recovery is completed,
disconnect SA080 from your computer.
7
Restart SA080.
English
EN