Planet Technology VIP-155PT - Manual (Page 47)

47
---entry –number xxx –ip x.x.x.x –protocol xxx _add xxx
Example:#entry –number 100 –ip 202.112.20.100 –protocol sip _add 123(dial 100 and
will send 123100 according this rule)
Add number-IP bond and replace the destination with another number
---entry –number xxx –ip x.x.x.x –protocol xxx _all xxx
Example:#entry –number 100 –ip 202.112.20.100 –protocol sip _all 123( user dial 100
and gateway will sent 100 instead)
Add number-IP bond and delete the prefix of the destination number
---entry –number xxx –ip x.x.x.x –protocol xxx _del xxx
Example:#entry –number 1234 –ip 202.112.20.100 –protocol sip _del 2 (dial 1234 will
send 34 instead)
Add number-IP bond and replace the prefix with another number
---entry –number xxx –ip x.x.x.x –protocol xxx _rep xxx _length xxx
Example:#entry –number 1234 –ip 202.112.20.100 –protocol sip _rep 567 _length
2(dial 1234 will send 56734)
Delete dial-peer entry ---no entry –number xxx
Show current dial-peer rules ---show
Set default voip protocol ---default-protocol xxx
¾ Port settings
path: #
或#
set accecp relay mode ---accept-relay xxx
set callerid mode ---callerid xxx
disable callerid ---no callerid
config call forward ---callforward –conditon xxx –number xxx –ip xxx –port xxx –protocol xxx
Example:#callforward –condition busy –number 100 –ip 202.112.10.100 -port
5060 –protocol sip
Disable call forward ---no callforward
[disable]enable call transfer ---[no]calltransfer
[disable]enable call waiting ---[no]callwaiting