Planet Technology VIP-155PT - Manual (Page 32)

32
----Make direct IP to IP call
----Place the call to different servers according the prefix.
You can click “Add” to add a new dial rule. Below is the detail setting of the dial-rule:
Field Description
Phone Number
The Number suit for this dial rule, can be set as full match or prefix
match. Full match means that if the number user dialed is completely
the same as this number, the call will use this dial-rule. Prefix match
means that if prefix of the number that the user dials is the same as
the prefix, the call will use this dial-rule, to distinguish from the full
match case, you need to add “T” after the prefix number in the phone
number setting
Destination
(optional)
call destination, can be IP or domain. Default is 0.0.0.0, in this case
the call will be routed to the Public SIP server. If you set the
destination to 255.255.255.255, then the call will be routed to the
private SIP server. Also you can key other address here to make
direct IP calls
Port (optional)
Configure the port of the destination, default is 5060 in SIP and 1720
for H323
Alias (optional)
Set up the Alias. We support four Alias as below. Alias need to
co-work with the Del Length:
¾ add:xxx, add prefix to the phone number, can set to reduce the dial
length.
¾ all: xxx, replace the phone number with the xxx, can use as speed
dial function.
¾ del, delete the first N numbers. N is set in the Del Length
rep:xxxreplace the first N numbers. N is set in the Del Length. For
Example: Use wants to place a call 8610-62281493, then you can set
the phone number in the dial rule as 010T, and set the Alias as
rep:8610, and set the Del Length to 3. Then all calls begin with 010
will be changed to 8610 xxxxxxxx.
Suffix (optional) Configure suffix, show no suffix if not set
Example: