Pioneer PDK-WT02 - Manual (Page 11)

11
En
Installation Procedure
7
Fix the bottom of the hardware with the
special screws removed at step 1 (one on
the left and one on the right).
8
Install the under speaker (PDP-S39).
1 Connect the speaker cord to the terminal on the
speaker.
2 Place the speaker installation hardware on the
speaker and using the screws that come with the
speaker, anchor both from the bottom (2 locations
on the left and right).
Note
Be sure to install the speaker with the hardware
attached vertically.
Special screw (M6)