Philips LTC0500 - Manual (Page 9)

English
15
9.2.1 Mode setting
The camera is delivered operating in Mode 1.
In total three modes are available.
Mode 1 = Backlight compensation
Mode 2 = Traffic
Mode 3 = Night (low light mode)
Mode 0 is a non-programmable mode (Default mode) in which factory settings are stored.
9.2.2 Video level setting
The nominal video level setting is 700 mV contrast. Adjustments are possible in +30/-30
steps.
9.2.3 Backlight compensation
Turn on the backlight compensation to improve the image quality when you have a scene
where the background features a high level of illumination.
To adjust the amount of back light compensation the use of the software configuration
tool is needed.
9.2.4 Shutter time selection
Auto, flickerless, fixed timing up to 1/100,000.The auto setting automatically optimizes the
shutter time according to the light conditions.
9.2.5 Linelock setting
Use this button to select between internal synchronisation and linelock.The camera will
switch to external lock when an external lock source is connected (see 9.2.6-9.2.8)
When DC is supplied, the camera selects internal synchronisation.
9.2.6 Linelock Phase
This function is active when the camera operates in linelock mode.
14
9.2 FUNCTION SET-UP
Use the buttons to change the following settings:
ϕ 358°
1/60
1/125
1/250
1/500
1/1000
1/2000
1/4000
1/10,000
ϕ 0°
Mode
Digital Camera
LVL BLC
LL Phase
1
2
SHUT
30 sec.
Default mode
Default Default
Mode 3
Mode 2
Mode 1
Default mode
Mode 3
Mode 2
Mode 1
Default mode
Mode
Mode LVL BCL
SHUT LL Phase
Lens Initialisation
Linelock
V-phase Deg
H-phase
extVphase
Backlight Comp
On
Off
Video Level
-30, +30
DC Lens
VI Lens
Linelock On
Linelock Off
Shutter
Off
Flickerless
Auto