Philips AC4054 - Manual (Page 10)

Removing the filters
Tip: Place the appliance against a wall for better stability while you remove or insert filters.
1 Place your fingers in the recesses of the side panels. Gently pull the top part of the front
panel off the appliance (1) and then lift the panel upwards to remove it (2) (Fig. 3).
To remove the particle filter, grab the filter handles at both sides and gently slide the filter
out of the appliance. (Fig. 4)
To remove the gas filter, slide it out of the appliance (Fig. 18).
You can only remove the gas filter after you have removed the particle filter.
To remove the pre-filter, slide it out of the appliance (Fig. 19).
Inserting the filters
Tip: Place the appliance against a wall for better stability while you remove or insert filters.
Note: Make sure you insert the filters in the correct position (with the arrow facing upwards).
Note: The appliance is equipped with a safety device. If you have not placed the particle filter, the gas
filter and the front panel properly, you cannot switch on the appliance.
1 Slide the gas filter into the appliance. (Fig. 5)
Slide the particle filter into the appliance (Fig. 6).
Slide the pre-filter into the appliance. (Fig. 20)
To reattach the front panel, insert the bottom edge first (1) and then press the top part
home (2) (Fig. 7).
Guarantee and service
If you need information or if you have a problem, please visit the Philips website at www.philips.com
or contact the Philips Customer Care Centre in your country (you find its phone number in the
worldwide guarantee leaflet). If there is no Customer Care Centre in your country, go to your local
Philips dealer or contact the Service Department of Philips Domestic appliances and Personal
Care BV.
Environment
Do not throw away the appliance with the normal household waste at the end of its life, but
hand it in at an official collection point for recycling. By doing this, you help to preserve the
environment (Fig. 21).
Frequently asked questions
This chapter lists the questions most frequently asked about the appliance. If you cannot find the
answer to your question, please contact the Customer Care Centre in your country.
General:
Question Answer
Why doesn’t the
selected function/time
mode work?
The appliance may be in standby mode or may be switched off.
,
,
English 10