6 other features, Set sleep timer, Play audio from an external device – Philips AJ7040D User Manual
Page 15: Adjust display brightness, Set alarm timer

9
To stop the ringing alarm, press the
•
corresponding AL1 / AL2 .
The alarm repeats ringing for the
•
next day.
Snooze alarm
When alarm sounds, press SNOOZE .
The alarm snoozes and repeats ringing
»
nine minutes later.
To adjust alarm interval (in minutes), press
SNOOZE repeatedly.
Set sleep timer
This clock radio can switch to standby mode
automatically after a preset period.
Press SLEEP repeatedly to select the sleep
timer period (in minutes).
When the sleep timer is activated,
»
appears.
To deactivate the sleep timer, press SLEEP
repeatedly until [OFF] (off) appears.
Play audio from an external
device
You can listen to audio from an external device
through this clock radio.
1
Connect the MP3 link cable to:
the
•
MP3 LINK socket.
the headphone socket of an external
•
device.
2
Press
MP3 LINK to select MP3 link source.
3
Start to play the external device (see the
user manual of this device).
Adjust display brightness
Press BRIGHTNESS repeatedly to select
different brightness levels.
15 30 60 90 120
off
6 Other
features
Set alarm timer
Set alarm
In standby mode, you can set two alarms to
ring at different time.
Note
Make sure that you have set the clock
•
correctly.
1
Press and hold AL1 / AL2 for two seconds
to activate alarm setting mode.
The hour and minute digits begin to
»
blink.
2
Press
/ and
/
repeatedly to set
the hour and minute.
3
Press
AL1 / AL2 to conÀ rm.
Select alarm source
Note
For alarm sound, you can select buzzer, your
•
last listened radio chanel, or latest played
audio in your iPod/iPhone.
Adjust AL1/2 RADIO·BUZZ·DOCK control
to select alarm source for both alarms.
Tip
When alarm time comes, the selected radio,
•
buzzer, or iPod/iPhone turns on.
If iPhone is selected as alarm source, while
•
no iPod/iPhone is connected, the clock radio
switches to buzzer source instead.
Activate/deactivate alarm timer
1
Press
AL1 / AL2 to view alarm settings.
2
Press
AL1 / AL2 again to activate or
deactivate the alarm timer.
The alarm icon appears if alarm timer
»
is on and disappears if it is off.
English
EN